Technical parameters
Products
RHINO AP-ETH
Rhino AP-ETH
Rhino AP is an IoT gateway designed to read data from metering devices and sensors. It is equipped with multiple communication interfaces and supports most popular protocols. In addition, it includes two RF channels for wireless communication with Rhino hardware. This allows Rhino devices to be configured and customised to implement an Advance Metering Infrastructure (AMI) class smart metering system in the building. The collected data is sent to the Rhino Cloud Platform via Ethernet. Rhino AP-ETH is powered by external 5-24DC power supply.
REQUEST A QUOTE
Description
| Communication type | Ethernet (DHCP / Static IP address) |
| Rhino communication | Frequency range: 433MHz ISM channel 1 – Rhino ED DI / ED DI-D / Sensors ISM channel 2 – Rhino ED RS485 / RS232Maximum of 50 end devices on each radio channel |
| Input voltage | 5-24VDC (> 10W) |
| Internal battery | 2700 mAh (emergency power supply) |
| Internal memory | uSD card (min. 8 GB) |
| Interface protocols | RS232 – DLMS, IEC62065 RS485 – DLMS, IEC62065, Modbus RTU, Gazmodern I, Gazmodern II Ethernet – DLMS, IEC62065, BACnet, Modbus TCP/IP, Custom network protocols Optional interfaces – -Bus, Wireless M-bus OMS |
| Configuration | Over the Air (OTA) |
| Firmware update | Over the Air (OTA) |
| Operating temperature | 0 ℃ – 85 ℃ (depending upon installed temperature) |
| IP class | IP40 (not suitable for outdoor use) |
| Dimensions | 87.5 mm x 90.0 mm x 65.0 mm (5 DIN modules) |
| Weight | -0.2kg |
| Additional equipment | 1 x ISM antenna with 3m cable and magnetic base |
